create clothes rails

Ralf Raaf — Wed, 16 Aug 2023 15:07:40 +0000

Put on clothes rails or closet tubes

If your hardware library for a new one closet pipe If you want to expand, please follow the steps below:

Navigate to the tab “ in the lower right area of the screenFittings”

You will find one at the top right yellow, upwards Arrow. If you click on it, a new menu bar will open

Please click on the first one here Yellow plus icon to create a new fitting.

Another menu will appear and all sorts types of fittings are given to you to choose from. For a clothes rail, choose the lowest of the new symbols.

Give one now names.

After entering the name and clicking “OK”, SmartWOP places a new element on your workspace that corresponds to the new closet tube.

You can in the list of suppliers select a manufacturer, or a new one Manufacturer insert, the same goes for the item number.

In line "icon“, you can if you click on the “...” at the end of the line click your own Picture deposit to better identify the fitting later.

The option "execution” allows you to select whether it is a simple or profiled closet tube acts.

Simple means it is defined by the width, height and the Radius of fillet. A radius of 0 produces a corner.

To produce a profiled tube you need one profile file, this must be present on your computer – click on Import profileto select the file.

We will explain exactly what a profile file must contain here.

In the next step, the drilling adapted for the attachment of the rod. To do this, click on “Edit”

Then use the mouse to select the holes. If you move the mouse over the holes, they light up blue and turn red when selected.

Now you can Properties of the holes change.

As soon as you have made all your settings and are ready to save the pipe, click again on the bottom right on “Fittings”

Now click on the yellow hook in the top row. Your selected image will now appear and the tube is ready to be used by you.

Der Beitrag Kleiderstangen anlegen erschien zuerst auf Tibek CNC-Technik - Macher von SmartWOP.

Create and define grip moldings

Ralf Raaf — Wed, 16 Aug 2023 14:55:11 +0000

Create and define grip moldings

All corners of the handle profile are defined via x and y and saved as a text file.

The following input results in the text editor for this handle profile bar.

Save your entry as a normal TXT file.

Enter a name for the grip.

Then select the sub-item grip type the option profile out of.

It becomes a button Import profile active.

Click on this button and then in the opened window select the previously saved TXT file.

The grip bar is mapped and can be adjusted via Profile Offset in x and y.

The two default drill holes for a standard handle still have to be selected and deleted in edit mode.

Then just assign a path and image for the grip profile bar.

The self-defined fitting is now available for further use in the favorites list.

Der Beitrag Erstellen und Definieren von Griff-Profilleisten erschien zuerst auf Tibek CNC-Technik - Macher von SmartWOP.

Fittings Archive - Tibek CNC-Technik - Makers of SmartWOP

create clothes rails

Put on clothes rails or closet tubes

Create and define grip moldings

Create and define grip moldings